DRONEWASH+
$0.10-$0.40 per square foot
20%-40% reported savings
High-rise work is listed at $0.25-$0.40+ per square foot.
Read source ↗Commercial drone cleaning cost
What drone cleaning costs. What it can save.
Current providers publish $0.10-$0.40 per square foot and 20%-60% savings. At 50% less per cleaning, the same annual budget buys twice as many cleanings.
Published Provider Figures
What the current market is publishing.
Vista Drone Cleaning
$0.12-$0.25 per square foot
30%-60% reported savings
One reported 130,000+ square-foot project is listed at $0.20 per square foot.
Read source ↗Humming
No public rate on the cited page
40%-60% reported savings above three stories
Published as a commercial planning claim.
Read source ↗Reviewed August 25, 2026. These are provider-published claims, not an independently audited or normalized national benchmark.
Public Conventional Bids
Access-heavy bids vary dramatically.
San Antonio Convention Center
$0.50-$3.50 / sq. ft.
Two 2023 conventional bids priced the new exterior location at $0.50 and $3.50 per square foot. Separate lift charges were $1,800 and $1,500.
Open public record ↗Alamodome exterior
2.85x bid spread
The 2024 same-stated-scope exterior price ranged from $10,800 to $30,792 per cycle, with two exterior cycles specified.
Open public record ↗Orange County high-rise award
$533,520 / 5 years
The five-year award was $533,520.05. Six responsive bids extended as high as $1,468,500.
Open public record ↗Transparent Calculator
Same budget. More cleanings.
Enter your current price and cadence, then move the savings rate. The model shows both same-budget frequency and annual savings without inventing a SkyPSI rate.
Illustrative output
2x
cleaning frequency at the same budget
4.0
cleanings funded per year
$5,000
modeled cost per cycle
$10,000
modeled annual savings at current cadence
Your current annual spend is $20,000. This is arithmetic, not a quote. It assumes the same cleaned area, finish, cadence, exclusions, and operating conditions. Four times the frequency requires 75% savings and is a best-case model.
20%
1.25x cadence
40%
1.67x cadence
50%
2x cadence
60%
2.5x cadence
75%
4x cadence
Cost Drivers
What moves the real number.
- [01]Height, elevations, and geometry
- [02]Glass area or pane count
- [03]Condition and bonded deposits
- [04]Surface and finish
- [05]Access, staging, and mobilization
- [06]Water, runoff, and airspace
- [07]Occupancy and work-window restrictions
- [08]Aerial, water-fed, restoration, and hands-on method mix
- [09]Cleaning frequency
- [10]Procurement and completion documentation
Comparable Scope
Compare the outcome, not two unrelated bids.
Hold the cleaned area, finish, frequency, exclusions, operating window, mobilization, and completion standard constant. Then the economic difference is visible instead of hidden inside two different scopes.
Common Questions
Commercial cleaning cost FAQ
No. The public ranges are third-party market references, not SkyPSI pricing. SkyPSI prices each property after reviewing the complete cleaning and access scope.
If one comparable cleaning costs half as much, the same annual budget buys two cycles instead of one. The calculator keeps the current annual spend fixed and changes only the cost per cycle.
Area, finish, condition, exclusions, mobilization, equipment, operating windows, documentation, and method mix can differ. A useful comparison holds those inputs constant.
Price the actual property
Turn the model into a building-specific number.
Request a QuoteProvider figures are third-party planning references, not SkyPSI prices. Public bid scopes are not matched to provider examples. The calculator is illustrative arithmetic. Final savings require a comparable property scope and written SkyPSI proposal.